Check the fit using perfectfit, Test – Petsafe UltraSmart® In-Ground Fence™ Receiver Collar User Manual
Page 18
Advertising
18
Customer Care Center 1-800-732-2677
www.petsafe.net 19
Check the Fit using PerfectFit
™
Test
To check the fit of the Receiver Collar using the PerfectFit
™
test, place the
collar on the Collar Charger for 5 seconds. Remove the Receiver Collar and
wait approximately 8 seconds for the collar to go through the ReadyTest
®
.
Do not touch the Contact Points during the ReadyTest
®
. Place the collar on
your pet and adjust the tightness until you hear the 5 consecutive chimes,
indicating a good fit. If you do not hear the 5 consecutive chimes, tighten
the metal buckle by one notch. Repeat the PerfectFit
™
Test.
Advertising