Readytest, Feature – Petsafe UltraSmart® In-Ground Fence™ Receiver Collar User Manual

Page 9

Advertising
background image

www.petsafe.net 9

To set the reminder, turn the switch to the OFF position, then move to either

the A or B setting. After the 30 or 60 days has passed, the Fence Transmitter

will sound three short reminder tones every minute. To reset the switch, turn

it to the OFF position and move back to either setting A or B, or you can

choose to turn the switch OFF to disable this feature.

ReadyTest

®

Feature

ReadyTest

®

gives you added confidence that the Receiver Collar is working

and ready to use. When you remove the Receiver Collar from the charger,

the receiver will automatically go into self-test mode for approximately 8

seconds. The receiver’s internal diagnostics will check that the battery charge

is full and that all circuits are working correctly. Do not touch the Contact

Points while the receiver is in test mode. When the collar is removed from

the charger, the indicator light will go off and then come back on. The light

will first glow red for three seconds, then go off. The indicator light will come

back on for five seconds to indicate the status of the battery (green, yellow or

red). The ReadyTest

®

is complete once you see the battery indicator status.

If the Receiver Collar beeps and the indicator light glows solid red for 20

seconds, the ReadyTest

®

self-test has failed. Replace the Receiver Collar in the

charger for 5 seconds and then remove. Do not touch the Contact Points. If the

Receiver Collar continues to fail the ReadyTest

®

, call the Customer Care Center.

Advertising