Ryobi EMM0001 - Manual (Page 7)

6 7
Fig. 2
KNOW YOUR MULTITASKIT ™
See Figures 1 - 2.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
AIRGRIP ™ VACUUM TECHNOLOGY
This product uses a vacuum base that can adhere to smooth
surfaces. Using the vacuum seal prevents wall damage
caused by nails or adhesive tape. The vacuum base is used
to hold the MultiTASKit
™ attachments and will support a
weight of up to 10 lbs. Recessed grooves on the base can
be used for attaching the end of a chalk line, and side slots
are available for holding the end of a tape measure.
CASE
A zippered fabric case stores and protects the tool and ac-
cessories when not in use.
HELPING HAND ATTACHMENT
Use the helping hand attachment to assist in holding small
amounts of weight up to 5 lbs. The hand can be extended
up to 1-1/2 in. and will rotate 360˚ horizontally and 35˚
vertically.
HOOK-AND-LOOP STRAP
The hook-and-loop strap can be used along with the multi-
function base to attach the unit to a variety of irregularly
shaped surfaces.
LASER LEVEL ATTACHMENT
The laser level attachment emits a laser line of up to 30 feet
and can be rotated 360˚.
LIGHTING ATTACHMENT
The lighting attachment has three medium-intensity LED
lights to provide light in dark work areas. It can be adjusted
vertically up to 90˚ and rotated horizontally 360˚.
MAGNETIC TRAY ATTACHMENT
The magnetic tray attachment can be used for holding screws,
nuts, and bolts. It features two holes for holding screwdriv-
ers or other small tools, and has a recessed front edge so
tools can lie flat on the surface. The tray can be adjusted
90˚ vertically and 360˚ horizontally.
MULTI-FUNCTION BASE
The multi-function base allows the unit to be used on irregu-
larly shaped walls or objects. It features built-in loops for a
hook-and-loop strap and magnetic sides to hold securely
to magnetic surfaces. The base also protects the unit when
using on a dusty or dirty surface and during storage.
ROUGH-SURFACE ADAPTOR
The rough-surface adaptor increases the number of surfaces
on which the AIRgrip
vacuum can be used.
FEATURES
HOOK-AND-LOOP
STRAP
CASE
MULTI-FUNCTION
BASE
ROUGH-SURFACE
ADAPTOR