Casio AP-200 - Manual (Page 11)

11
9.5 Pan (0AH)
Format
Note 1:
For information about the relationship between setting values and send/receive values, see "25.5 Pan Setting Value Table"
in "Part VII Setting Values and Send/Receive Values".
Send
This message is sent at initialization.
Receive
Receipt changes the pan setting of the corresponding part.
9.6 Expression (0BH)
Format
Send
This message is not sent by this Instrument.
Receive
Receipt changes the Expression value.
9.7 General Use Controllers 1 through 8 (10H through 13H, 50H through 53H)
These messages are used to control DSP operation.
Format
Send
This message is not sent by this Instrument.
Receive
Receipt change the value of Parameter7 [0-7] (7-Bit Parameter) explained under "21.3 DSP Parameter".
Any message received that corresponds to the parameter of a number not being used by the currently selected DSP is ignored.
Message Format: BnH 0AH vvH
n: MIDI Channel Number
vv: Value (Note1)
Message Format: BnH 0BH vvH
n: MIDI Channel Number
vv: Value
Message Format: BnH 10H vvH
BnH 11H vvH
BnH 12H vvH
BnH 13H vvH
BnH 50H vvH
BnH 51H vvH
BnH 52H vvH
BnH 53H vvH
DSP Parameter7[0]
DSP Parameter7[1]
DSP Parameter7[2]
DSP Parameter7[3]
DSP Parameter7[4]
DSP Parameter7[5]
DSP Parameter7[6]
DSP Parameter7[7]
n: MIDI Channel Number (Note1)
vv: Value