Casio AP-200 - Manual (Page 34)

34
19 Setup Parameter
Setup Parameters put a device into the setup mode.
19.1 MIDI Parameter
20 Patch Parameters
20.1 Master Tune Parameter
These parameters configure Master Tuning settings.
20.2 Master Mixer Parameter
These parameters configure the Master settings of the mixer.
20.3 System Chorus Parameter
Note 1:
Selects the System Chorus preset type. Receipt of GM/GS Reset selects Chorus3.
The value of this type is also linked to System Chorus parameters, and to the Chorus Send to Reverb and System Chorus
Return Level parameters, and its setting causes these parameters to change to prescribed values.
For details about the preset type list, see "25.8 Chorus Type Setting Value Table".
Parameter ID R/W Block Size Array Min-Def-Max Description
Midi Device Id 0023 R/W 000000 7 01 00-7F-7F 0 - 127
Parameter ID R/W Block Size Array Min-Def-Max Description
Master Fine Tune
Master Fine Tune8
Master Coarse Tune 0000
0080
0001 R/W
R/W
R/W 000000
000000
000000 7
8
7 01
01
01 00-40-7F
00-80-FF
00-40-7F -100 - 0 - +99(cent)
-100 - 0 - +99(cent)
-24 - 0 - +24(semitone)
Parameter ID R/W Block Size Array Min-Def-Max Description
Master Volume
Master Pan
Acou Reso To Chorus
Acou Reso To Reverb
Acou Reso Return
Chorus To Reverb
Chorus Return
Reverb Return
Dsp Cancel 0004
0005
0008
000A
000B
000F
0010
0017
001A R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W 000000
000000
000000
000000
000000
000000
000000
000000
000000 7
7
7
7
7
7
7
7
1 01
01
01
01
01
01
01
01
01 00-7F-7F
00-40-7F
00-00-7F
00-00-7F
00-40-7F
00-00-7F
00-40-7F
00-40-7F
00-00-01 0 - 127
-64 - 0 - +63
0 - 127
0 - 127
0 - 127
0 - 127
0 - 127
0 - 127
0...Normal
1...Cancel
Parameter ID R/W Block Size Array Min-Def-Max Description
Cancel
Type
Rate
Depth
Feedback
Tone
002A
002B
002C
002D
002E
002F
R/W
R/W
R/W
R/W
R/W
R/W
000000
000000
000000
000000
000000
000000
1
7
7
7
7
7
01
01
01
01
01
01
00-00-01
00-02-0F
00-03-7F
00-13-7F
00-00-7F
00-7F-7F
0...Normal
1...Cancel
1 - 16 (Note1)
0 - 127
0 - 127
0 - 127
0 - 127