Ryobi IR002 User Manual

Operator’s manual, Ir002, Non-contact infrared thermometer

Advertising
background image

ONE WORLD TECHNOLOGIES, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 • Phone 1-800-525-2579

États-Unis, Téléphone 1-800-525-2579 • USA, Teléfono 1-800-525-2579

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS.

WARNING:

Use of controls or adjustments or performance

other than those specified herein may result in

hazardous radiation exposure.

n

Avoid direct eye exposure when using the laser

and do not project the laser beam directly into

the eyes of others. Serious eye injury could

result.

n

Do not operate the laser around children or

allow children to operate the product. Serious

eye injury could result.

n

Do not use for medical evaluations or to

measure body temperature. This product is

meant for household use only.

n

Never aim the beam at a person or object

other than the target surface.

OPERATOR’S MANUAL

Non-Contact InfraRed

Thermometer

IR002

FEATURES

PRODUCT SPECIFICATIONS

Temperature Range: -4˚F to 600˚F (-20˚C to 315˚C)
Laser Certifications: Class II<1mW, 630-670 Nm
Ambient Operating

Temperature Range: 32˚F to 122˚F (0˚C to 50˚C)

OPERATION

MAINTENANCE

GENERAL SAFETY RULES

Fig. 1

APPLICATIONS

n

Detects hot/cold spots in door and window

seals to help pinpoint draft areas or leakage of

warm or cool air

n

Check the temperature of air vents

n

Check the exterior/interior surfaces of house-

hold items and appliances

n

Automotive applications

INSTALLING THE BATTERY

See Figure 2.
A 9 Volt battery (included) must be installed

before using the thermometer.
To install the battery:
n

Slide the battery cover down, then up and

remove it from the handle of the thermometer.

n

Attach the battery terminals to their connectors

on the thermometer.

n

Slide the switch inside the handle to select

Fahrenheit or Celsius temperature readings as

shown in figure 2.

n

Close the battery compartment by sliding the

cover into place until it snaps closed.

TAKING TEMPERATURE READINGS

See Figure 3.
For the most accurate readings, follow these hints:

OPERATION

Fig. 3

Fig. 2

NOTE: Temperature readings can only be

measured on a target surface.
n

Place the unit less than two (2) feet from the

item you wish to read.

n

Accuracy of readings is plus ( + ) or minus ( - )

5°C of the actual temperature, assuming

ambient temperature of 25 + / - 1ºC.

n

Readings at distances greater than two (2)

feet may be less accurate due to external

light sources, surrounding air temperature and

reading of larger surface areas not intended to

be measured.

n

Cleaner surfaces will give more accurate

readings.

n

Allow 10-15 minutes to adjust to extreme

temperature changes when testing an item or

area out of the operating range 32˚F - 122˚F

(0˚C - 50˚C).

SPOT READINGS

NOTE: The laser beam will remain on as long as

the trigger is depressed.
n

Aim at the target item or surface.

n

Pull and release the trigger once.

n

The target temperature reading is displayed on

the screen for approximately 7 seconds after

the trigger is pulled.

CONTINUOUS READINGS
n

Aim at one location. Pull and hold the trigger.

Move the laser beam over another location.

n

The temperature will be displayed and will

change when the target object changes.

n

The maximum temperature read will also be

displayed.

n

The target temperature reading is displayed

on the screen for approximately seven (7) sec-

onds after the trigger is released.

Do not immerse the product in water. Clean only

the exterior using a damp cloth.
To ensure accurate readings, the battery should

be replaced when the battery indicator shows a

low battery.
To receive a replacement product, you must

present proof of purchase and return all original

equipment packaged with the original product.

The replacement product will be covered by the

limited warranty for the balance of the two year
period from the date of the original purchase.

1 LASER BEAM

FAISCEAU LASER

RAYO LÁSER

8 BATTERY COVER

COUVERCLE DU COMPARTIMENT

DE LA BATTERIE

CUBIERTA DE LA BATERÍA

2 MEASURING

BEAM

FAISCEAU DE MESURE

RAYO MEDIDOR

9 BATTERY

COMPARTMENT

COMPARTIMENT DE LA BATTERIE

COMPARTIMIENTO DE

LA BATERÍA

3 TRIGGER

GÂCHETTE

GATILLO

10 LASER INDICATOR

INDICATEUR LASER

INDICADOR LÁSER

4 LCD DISPLAY

AFFICHEUR ACL

PANTALLA DE CRISTAL

LÍQUIDO

11 BATTERY

INDICATOR

INDICATEUR DE NIVEAU DE

CHARGE

INDICADOR DE BATERÍA

5 BATTERY

COMPARTMENT

COMPARTIMENT DE LA

BATTERIE

COMPARTIMIENTO DE

LA BATERÍA

12 MAXIMUM

TEMPERATURE

TEMPÉRATURE MAXIMUM

TEMPERATURA MÁXIMA

6 C° / F° SELECTOR

SÉLECTEUR CELSIUS°/

FARENHEIT°

SELECTOR DE GRADO

CELSIUS O FARENHEIT

13 C° / F°

C° / F°

C° / F°

7 9 VOLT BATTERY

BATTERIE DE 9 VOLT

BATERÍA DE 9 V

14 CURRENT

TEMPERATURE

TEMPÉRATURE ACTUELLE

TEMPERATURA ACTUAL

n

Do not use this product as a precision

thermometer.

n

Avoid exposing the unit to shock, continuous

vibration, or extreme hot or cold temperatures.

Damage to the product and/or serious injury to

the user could result.

n

Save these instructions. Refer to them frequently

and use them to instruct others who may use this

product. If you loan someone this product, loan

them these instructions also to prevent misuse of

the product and possible injury.

GENERAL SAFETY RULES

12

1

2

4

3

5

7

10

13

14

11

8

9

6

AVOID EXPOSURE: Laser radiation

is emitted from this aperture.

Maximum output <1 mW Wavelength: 630-670nm

Class II laser product RYLD

Solar Wide Industrial Ltd.

CDW Building, Units A-C, 18/F

388 Castle Peak Road, Tsuen Wan

New Territories, Hong Kong

IR002

941911002-01

Advertising