Chief Manufacturing KWK-110 - Manual (Page 7)

Installation Instructions KWK-110
7
Figure 8
ADJUSTMENTS
Swing Arm
Pivot/Swing
1. Using 3/16" hex key (L), slightly loosen or tighten the
adjustment screw(s) as necessary. (See Figure 9)
Figure 9
Mouse Tray Adjustment
1. Mouse trays slide open and closed on both sides of the tray
for both right-handed and left-handed users. (See Figure 9)
Height Adjustable
1. Using 5/32" hex key (M), slightly loosen or tighten the
adjustment screw as necessary. (See Figure 10)
• If display settles on its own, rotate adjustment
screw counterclockwise (towards the "+" symbol).
• If display rises on its own, rotate adjustment
screw clockwise (towards the "-" symbol).
NOTE: It may be necessary to raise or lower the height
adjustable arm to expose the adjustment screw.
Figure 10
Tray Tension Adjustment
1. Using 1/4" hex key (K), slightly loosen or tighten the tray
tension adjustment screw as necessary. (See Figure 11)
Figure 11
Cable Path
(typical)
(B) x 1
(G) x 2
Pivot/Swing Adjustment Screws
Adjustable Mouse
Trays
Height Adjustable Screw
Tray Tension Adjustment Screw