Cisco SFS 7008P - Manual (Page 7)

7
Cisco SFS 7008P InfiniBand Server Switch Installation and Configuration Note
78-17434-01 Rev. A0
Installing the Cisco SFS 7008P Switch into a Rack
Figure 4 Install Appropriate Shelf
Step 2 Ground yourself using an approved ground wrist-strap.
Step 3 Determine the direction that the switch will be installedand justified in the rack.
The direction that the switch will be justified determines which set of mounting brackets need to be
removed in the next step.
Step 4 Remove one set of mounting brackets, as shown in Figure 5 :
• If the switch will be justified toward the bezel-side in the rack, then unscrew the mounting brackets
from the port-side of the switch.
• If the switch will be justified toward the port-side in the rack, then unscrew the mounting brackets
from the bezel-side of the switch.
144964