Installing the cisco sfs 7008p switch into a rack, Figure 3 – Cisco SFS 7008P User Manual

Page 6

Advertising
background image

6

Cisco SFS 7008P InfiniBand Server Switch Installation and Configuration Note

78-17434-01 Rev. A0

Installing the Cisco SFS 7008P Switch into a Rack

Figure 3

LIM and Fabric Module Connections

Installing the Cisco SFS 7008P Switch into a Rack

This section describes how to install the Cisco SFS 7008P switch in an equipment rack. If you purchased
the custom Cisco SFS 7008P switch shelf, follow the directions in the Cisco SFS 7008 InfiniBand Server
Switch Hardware Installation Guide
. To mount the Cisco SFS 7008P switch chassis in an
industry-standard rack, follow these steps:

Step 1

Install a shelf for the chassis as shown in

Figure 4

, if you have not already done so.

The shelf must support the weight of the chassis, which can be up to 106 pounds if all possible
components are installed.

Fabric card in slot 9

LIM card in slot 1

LIM card in slot 2

LIM card in slot 3

LIM card in slot 4

LIM card in slot 5

LIM card in slot 6

LIM card in slot 7

LIM card in slot 8

Fabric card in slot 10

Fabric card in slot 13

Fabric card in slot 14

154550

Advertising