Ryobi TS1354DXL - Manual (Page 10)

10
FEATURES
Fig. 1
PRODUCT SPECIFICATIONS
Blade Arbor .............................................................. 5/8 in.
Blade Diameter .......................................................... 10 in.
No Load Speed .................................... 5,000 r/min. (RPM)
Input ................................120 V, 60 Hz, AC only, 15 Amps
Net Weight ............................................................ 34.9 lbs.
Cutting Capacity with Miter at 0°/Bevel 0°:
Maximum nominal lumber sizes: .................... 2 x 6, 4 x 4
Cutting Capacity with Miter at 45°/Bevel 0°:
Maximum nominal lumber sizes: ..............................2 x 4
Cutting Capacity with Miter at 0°/Bevel 45°:
Maximum nominal lumber sizes: ..............................2 x 6
Cutting Capacity with Miter at 45°/Bevel 45°:
Maximum nominal lumber sizes: ..............................2 x 4
LOWER
BLADE GUARD
DUST GUIDE
UPPER
BLADE GUARD
SAW ARM
BASE
MITER
LOCK HANDLE
BEVEL
SCALE
BEVEL
LOCK
KNOB
POSITIVE
STOP(S)
SWITCH TRIGGER
THROAT PLATE
“NO HANDS ZONE”
LABEL
CONTROL
ARM MITER
LOCK PLATE
“NO HANDS ZONE”
BOUNDARY LINE
MITER SCALE
BLADE
WRENCH
STOP BLOCK
TABLE
EXTENSIONS
SLIDING
MITER
FENCE
MITER
TABLE
DUST BAG
WORK
CLAMP