Ryobi TSS101L - Manual (Page 25)

25
0
0
OPERATION
TO SUPPORT LONG WORKPIECES
See Figure 32.
Long workpieces need extra supports. Supports should be
placed along the workpiece so it does not sag. The support
should let the workpiece lay flat on the base of the saw and
work table during the cutting operation. Use the optional
work clamp or a C-clamp to secure the workpiece.
Fig. 32
Fig. 31
45 ° X 45 ° COMPOUND MITER CUT
LONG
WORKPIECE
WORKPIECE SUPPORTS