US Balance US-PRISM 500g x 0.1g - Manual (Page 2)

Pocket Scale
US-STINGER 500g X 0.1g
2
Digital Pocket Scale
WEIGHING
Before weighing
Whenever possible, please allow the scale to warm up for 30 seconds after first turning the power on so that
the scale will function properly and accurately.
Error messages
EEEE: Overload
: Low Battery
Calibration may be required before weighing.
Read “CALIBRATION” first and if necessary, calibrate your scale for accurate weighing.
Weighing procedures

Press [ON/OFF] to turn on the scale.

When power is turned on, all display segments appear on LCD for a few seconds and finally “0” will
appear on the display.

Select the weighing unit with [UNIT].

Press [UNIT] to select a weighing unit, Ex. “g”-,"oz” ,"ozt", "dwt". Once the unit has been selected, the
selected unit will be displayed to the weight value.
Start weighing
If you do not use a container for weighing:

Verify the reading is “0”. If not, press [ZERO] to display “0”.

Place objects on the weighing platform to weigh. When the reading becomes stable, the stable
weighing value is displayed.

If you use a container for weighing:

Place an empty container on the platform.

Wait for the stability weighing value to be displayed and press [ZERO] to display “0”.

Place the objects to be weighed in the container.
When the reading becomes stable, the stable weighing value is displayed.