Canon eos rebel T2i - Manual (Page 168)

Viewing the Images on TV
168
For HDMI CEC TV sets
When a TV set compatible with HDMI CEC* is connected to the camera with the
HDMI cable, you can use the TV set’s remote control for playback operations.
* A function enabling you to control multiple HDMI devices with one remote control unit.
1
Select [Ctrl over HDMI].
Under the [4] tab, select [Ctrl over HDMI], then
press <0>. Select [Enable], then press <0>.
X When the camera is connected to a TV
set, the TV set’s input will automatically
switch to the HDMI port connected to the
camera. When you press the camera’s
<x> button, you can use the TV set’s
remote control for playback operations.
2
Select the image.
Point the remote control to the TV set
and press the / button to select the
image. Then press the Enter button.
X The menu will appear. The menu displayed
will differ for still photos and movies.
Press the / button to select an
option, then press the Enter button.
X For a slide show, press the remote
control’s / button to select an
option, then press the Enter button.
Select [Return] and press the Enter
button. The menu will disappear and you
can use the / button to select an image.
Do not connect any other device’s output to the camera’s <D>
terminal. Doing so may cause a malfunction.
Some TVs might not be able to display the captured images. In such a
case, use the provided AV cable to connect to the TV.
The camera’s <q/C> terminal and <D>
terminal cannot be used at the same time.
COP
Y