Zigen HX-88 - Manual (Page 7)

Matrix Switching System—User Manual
7
5.0 Front/Rear Panels
5.0.1 Front Panel
Figure 5-1 HX-88 Front Panel
The HX-88 Matrix Switching System supports up to 8 Output/Input switching keys on the
Front Panel allowing you to switch signals quickly.
Operation method No. 1: “Output Channel”+“Input Channel”
Click the Output button then click the Input button to set the combinations.
Operation method No. 2:
“STO or RCL”+“Output Channel”
Click the STO or RCL button then click the Output button.
Operation method No. 3: single operation
This example for EDID button, you can click the EDID button directly.
Operation method No. 4: “STO and RCL”+“Input Channel”
Click the STO and RCL button then click the Input button to set the combinations.
 OUT1~8 keys (output channel): Indicate the Channel 1~Channel 8 for HDMI singal
output to peripheral display. You can also use these keys to adjust the status or access
the settings
 IN1~8 keys (input channel): Indicate the Channel 1~Channel 8 for HDMI singal input.
You can use these keys to switch to the connection of the connected signal source
channels.
 IR1: Infrared receiver.
 All: This key allows you to set single input channel to all output channels.
- Press the “All” key.
- Select one of the IN 1~8 keys.
- The selected IN x key will deliver the singal to all output channels.
- You can also press “All” key and then the “OFF” key to disable all displays.
 OFF: Disable the entire output channels. Press one of the OUT x keys that you want to
disable.