Zylight F8 Fresnel - Manual (Page 2)

F8 Fresnel Introduction
Introduction: The multiple award-winning F8 LED Fresnel from Zylight
is the next generation of Fresnel lights. By incorporating a special
blend of Quantum nanoparticles with traditional phosphor the F8
boasts a high CRI (color rendering index) and a quality of light matched
only by traditional sunlight and incandescent bulbs, while using a
fraction of the energy. The F8 LED Fresnel is part of Zylight’s pursuit of
high quality, affordable, intelligent fixtures. The unit can be controlled
manually, wirelessly or via DMX controller.
Every F8 LED Fresnel has been thoroughly tested and has been
shipped in optimal operating condition. Carefully check the shipping
carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your fixture for any
damage and be sure all accessories necessary to operate the unit have
arrived intact. If damage has been found or parts are missing, please
contact our customer support number for further instructions. Do not
return this unit to your dealer without first contacting customer
support.
Your F8 includes the following items:
• One - Zylight F8 LED light head
• One – F8 4-way barn door
• One - Yoke bar with 5/8” baby pin adapter
• One - Yoke adjustment knob
• One – Slotted thumbscrew
• Two - 1/4" x .69" OD nylon washers (fig 1)
• Three - 1/2" x .75" OD nylon washers (fig 2)
• One - Serrated #10/M5 x .36" OD, .02" Stainless Washer (fig 3)
• One - Worldwide AC Adapter
• One - AC Adapter hanging pouch (for light stand use)
• One - Barn Door Safety cable
• One – F8 User Guide
Page 1
fig 2 fig 3 fig 1