Cabletron Systems SMARTSWITCH ROUTER 9032578-05 - Manual (Page 78)

ATM Sample Configuration 1
52 SmartSwitch Router User Reference Manual
ATM Sample Configuration 1
Consider the following network configuration:
The network shown consists of two SmartSwitch Routers, VLAN A, and VLAN B. Both
SSRs have an ATM module with two ATM ports. Also both SSRs contain a 10/100 TX
Ethernet module. SSR1 is connected to VLAN A through Ethernet port et.2.1, while SSR2
is connected to VLAN B through Ethernet port et.1.1.
This example shows how to configure this network so that we are able to pass traffic from
VLAN B to VLAN A. The following steps will lead you through the configuration process.
SSR 2
SSR 1
et.1.1
et.2.1
at.1.1 at.2.1
VLAN B
VLAN A
Subnet 11.1.2.0
Subnet 11.1.1.0
11.1.1.1/24
11.1.2.1/24
11.1.100.1/24 11.1.2.1/24