Curtis TC924 - Manual (Page 25)

E. Adjusting the Contrast
1. Press and hold the Voice Mail/Func button to enter the menu.
2. Press the 5 button to go to the CONTRAST programming option.
3. Press the Flash/Edit button to change the setting. “4” will begin flashing.
4. Press the SCROLL UP or DOWN button to toggle from 1 to 8 levels of contrast.
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to save
the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the Voice Mail/Func button to return to
STANDBY mode.
F. Setting the PBX Number
1. Press and hold the Voice Mail/Func button to enter the menu.
2. Press the 6 button to go to the PBX NUMBER programming option.
3. Press the Flash/Edit button to change the setting. “OFF” will begin flashing.
4. Press the SCROLL UP or DOWN button to customize the digit to match your
PBX system. When not connected to a PBX, the phone will only function normally
when set to “OFF.”
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to save
the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the Voice Mail/Func button to return to
STANDBY mode.
G. Changing the Flash Time
1. Press and hold the Voice Mail/Func button to enter the menu.
2. Press the 7 button to go to the FLASH TIME programming option.
3. Press the Flash/Edit button to change the setting. “600” will begin flashing.
4. Press the SCROLL UP or DOWN button to select the desired FLASH TIME.
Caller ID System Operation
24