21 59 starting of the engine, Adjusting the shift point – OFNA Racing DM-1 Pro User Manual

Page 27

Advertising
background image

21

59

STARTING OF THE ENGINE

1. Turn on transmitter and then receiver.
2. Fill fuel tank with fuel bottle.
3. Connect 1.2V glow plug

.

4. Start engine with a 12V starter.
( Notice the direction of the starter.)
5. After the engine has started, remove the
1.2V glow plug

.

igniter

igniter

* Follow the engine manufacturer instruction
manuals regarding engine set-up, carburetor
and maintenance.

How to start the engine:

A 12V Starter Box
( Not Included)

1.2V Glow Plug Igniter and
Charger (Not Included)

Glow Plug (Not Included)

*There are 2 types of glow plugs
available"NORMAL" or "Turbo"
depending on the type of the engine.

Normal Plug

Turbo Plug

*To start the car, attach a glow plug igniter
to the glow plug, and use either a 12V electric
starter or starter box applied to the flywheel
exposed through the chassis.

Starter Box
(Not Included)

1.2V

1.2

V

*Applied to the flywheel
exposed through the
chassis.

SHIFT UP TIMING ADJUSTMENT

Adjust the engine before adjusting the clutch shift timing.
Adjust the engine as per engine instruction manual.

1. Once the engine adjustments have been completed, proceed to the
adjustment of the clutch shoe shift timing.
(Using a 2mm allen wrench to adjust the clutch shoe on either side.)

Note: Clockwise--------Shift timing will become later.
Counterclockwise---Shift timing will become quicker.

2. Adjust the clutch shift timing for your track conditions.
As you tighten (Clockwise) the 3x15mm screw, the shift timing will
become slower.
As you loosen (Counterclockwise ) the 3x15mm screw, the shift timing
will become quicker.

3. Set the shift timing to the track conditions while the car is running.

3x15mm
Hex Screw

3x15mm
Hex Screw

6x6mm
Set Screw

2mm
Allen Wrench

Clockwise
(Tighten)

Anti-clockwise
(Loosen)

ADJUSTING THE SHIFT POINT

2 SPEED GEAR RATION COMBINATIONS

2 speed transmission allows the car to have more punch out of the
corners and higher top speed. We offer many different pinion and
spur gear combinations which can be used for different tracks.

Spur Gear

Clutch Gear (4 tooth different)

49T/45T

48T/44T

15T-19T

16T-20T

17T-21T

Torque

Speed

10215 - Glow Heater, Extra Long
W/Charger.

10250 - Starter Box 1/8 scale
On/Off-Road.

51007

51006

Advertising