OFNA Racing DM-1 RTR - Manual (Page 23)

Step 1 Step 2
ASSEMBLY OF THE REAR EXHAUST PIPE DETAILS 51
53 ASSEMBLY OF THE TIRES AND WHEELS
52 ASSEMBLY OF THE AIR FILTER
18
38400
Air Filter
86032
Wheel
40735
Muffler
86059
Inner Sponge
(WidE)
86052
Tire
94002
3x8mm
Hex Screw
.....x2
94009
4x10mm
Hex Screw
.....x2
94040
3x8mm
Washer
3x8mm
Hex Screw
3x8mm
Washer
4x10mm
Hex Screw
3x12mm
Hex Screw
A-81
Nylon Strap
86059
Inner Sponge
(Narrow)
*Notice the direction and make two lift and
right hand side tires are the same.
*Check the rotation direction before gluing.
40735
Muffler Mount
94004
3x12mm
Hex Screw
.....x2
*Notice the direction
of the tires.
*Notice the direction
of the tires.
NST
NT
I
A GL
UE
Tighten
Tighten
(Right Hand Side)
(Left Hand Side)
10177
Fuel Tube
Connect to
pressure nipple.
Connect to fuel tank
pressure nipple.
Connect to carburetor.
Connect to fuel tank.
Contact
Adhesive
Contact
Adhesive
Contact
Adhesive
Contact
Adhesive
*Notice the direction of the tires. Make two
the same for the left and 2 for the right.
Check the rotation direction before gluing.
*Pull back the tire bead slightly and spot glue in four spots as
shown. When dry, glue the rest of the wheel between the spots.
Repeat the procedure on the other side of the wheel until fully
glued.
*Apply filter oil to the
foam before use.
.....x2
10239
CA Glue
10239
CA Glue