OFNA Racing DM-1 Spec RTR - Manual (Page 26)

20
55 STARTING OF THE ENGINE
1. Turn on transmitter and then receiver.
2. Fill fuel tank with fuel bottle.
3. Connect 1.2V glow plug
.
4. Start engine with a 12V starter.
( Note the direction of the starter.)
5. After the engine has started, remove the
1.2V glow plug
.
igniter
igniter
* Follow the engine manufacturer instruction
manuals regarding engine set-up, carburetor
and maintenance.
How to start the engine:
Starter rubber ring for car.
( Insert starter rubber ring
on the 12V starter.)
12V Starter
A 12V Starter and Starter
Ring ( Not Included)
1.2V
Glow Plug Igniter
Charge for 1.2V
Glow Plug Igniter
1.2V Glow Plug Igniter and
Charger (Not Included) Glow Plug (Not Included)
*There are 2 types of glow plugs
available "NORMAL or Turbo"
depending of the type of the engine.
Normal Plug
Turbo Plug
*To start the car, attach a glow plug igniter
to the glow plug, and use either a 12V electric
starter or starter box applied to the flywheel
exposed through the chassis.
Starter Box
(Not Included)
1.2V
*Connect to a 12V battery.
*Notice the clockwise direction
of the starter ring.
1.2
V
*Applied to the flywheel
exposed through the
chassis.
54 MOUNTING BODY
31159
31159