OFNA Racing DM-1e Spec - Manual (Page 24)

49
50
Step 1
ASSEMBLY OF THE WHEELS ONTO THE FRONT KNUCKLE AND REAR HUB
51
.....x4
40550
Wheel Nut
•Tire and Wheel assembly.
40550
•Notice the direction of the tire pattern.
Assemble both right and left side.
86023 BLACK
86024 BLUE
86025 LIME
86026 WHITE
86027 ORANGE
86028 GRAY
86059
86052 STOCK NO BELT
86053 WITH BELT
86059
•Notice the direction
of the tires.
INS
T
T AN G
LUE
(Right Hand Side)
Contact
Adhesive
Contact
Adhesive
Contact
Adhesive
•Notice the direction of the tires. Make two
the same for the left and 2 for the right.
Check the rotation direction before gluing.
•Pull back the tire bead slightly and spot glue in four
spots as shown. When dry, glue the rest of the wheel
between the spots. Repeat the procedure on the other
side of the wheel until fully glued.
ASSEMBLY OF THE TIRES AND WHEELS
Contact
Adhesive
•Notice the direction
of the tires.
(Left Hand Side)
MAKING HOLES AND CUTTING ON THE BODY SHELL
Step 2 Step 1
Cut the body shelll as shown.
Wing Side Plate
31157
Left
Right