OFNA Racing Mutilator - Manual (Page 23)

20
49
50
ASSEMBLY OF THE WING
94004
3X12mm
Hex Screw
40027
Countersunk
Plastic Washer
94041
3mm
Nylon Nut
94041
3mm ........X2
Nylon Nut
94004
3X12mm ........X2
Hex Screw
94041
3mm
Nylon Nut
40083
Wing
0
5 10 15 20 25 25 20 15 10 5
MOUNTING BODY
Starter Box
(Not Included)
51 STARTING OF THE ENGINE
1. Turn on transmitter and then receiver.
2. Fill fuel tank with fuel bottle.
3. Connect 1.2V glow plug starter.
4. Start engine with 12V starter.
( Note the direction of the starter.)
5. After the engine be started, remove the
1.2V glow plug starter.
* Follow the engine manufacturer instruction
manuals regarding engine set-up, carburetor
and maintenance.
Connect with
12V battery.
Notice the rote direction
of the starter.
1.2
V
Check the hole spacing on the underside.
31159
Body Clips
31159
Body Clips
31159
Body Clips
1.2V
*To start the car, attach a glow plug igniter
to the glow plug, and use either an electric
starter or starter box applied to the flywheel
exposed through the chassis.