Rtr kits - required for operation, Things needed, Glow fuel 20 – OFNA Racing Mutilator User Manual

Page 3

Advertising
background image

TOOLS NOT INCLUDED IN KIT

Phillips Type Screw Drivers ( L )

Phillips Type Screw Drivers ( S )

Needle Nose Pliers

Cutter

Curved Scissors

Knife

Instant Cemment

Masking Tape

Paints

Brush

Precision Caliper

INCLUDED WITH KIT

1000

3000

5000

Diff. Oil

Shock Oil

1.5mm Allen Wrench

2mm Allen Wrench

2.5mm Allen Wrench

4mm'5mm Allen Wrench

RTR KITS - REQUIRED FOR OPERATION

THINGS NEEDED

AA Batteries ( 12 pcs )

Glow Fuel

20%

You will need to buy a few items to start the engine and run the car.
• Use 20% nitro CAR fuel. Do not use airplane or heli fuels, they will
over heat engine.

• Buy LONG glow plugs, like OFNA/PICCO Plug (#51007 or 51008).
Use plugs without idle bar. Do NOT use plugs, like the MC-59 or OS-8

In your box you will find..
• #10162- Bottle, 250cc
• #10219 - Red “D” size glow heater

#10212 Rec’v Bat.
NiHm Hump Pack,
see charger 10214.

10214

Rec’v Bat.

Over-nite

Charger

10195

7.2 Volt

Over-nite

Charger

You need to get batteries for the radio transmitter and the car receiver packs.
• Radio TX needs (8) eight AA batteries.
• Shaft Starter requires a 7.2Volt battery pack and charger OFNA #10195
• Car needs (4) four AA Ni-cad batteries 2000Mah or higher or (4) Alkaline., Alkaline type
batteries will work, but braking will be reduced and 30 minute life. The best for car, is to use a 5
cell hump receiver pack for increased voltage and longer life..

Recommended Option:
You may want to upgrade the car battery pack to a Ni-Cad or NiHm 5 cell type(600AE). This will
give more run time. OFNA #10212 1400NiMh Hump Pack and NiHm Battery Charger #10214

Cross Wrench
#17109 $3.95

Glow Plug & 17MM Cross Wrench
#10801 $6.95

Advertising