OFNA Racing Picco Offroad - Manual (Page 25)

19
54 ASSEMBLY OF THE BODY AND PAINTING
Cut out the body as shown.
Use a neutral detergent to
remove any dirt and oil.
Mask the windows from
the inside with masking tape. Apply internal color decals
from the inside and paint the body
with polycarbonate spray paints.
Spray Paint
Cutting holes.
*Hole for fuel tank.
*Hole for engine.
Cut out for engine.
*For the exhaust outlet
of the muffler.
*Hole for antenna pipe.
*Make a 8mm hole
for body mount.*
*Make a 8mm hole
for body mount.