OFNA Racing Ultra LX 2e RTR - Manual (Page 33)

51 BATTERY INSTALL
52 MAKING HOLES AND CUTTING ON THE BODY SHELL
53
If use hard case battery , make a hole as picture shown.
8mm
15mm
Follow the manual instruction provided by ESC
manufacturer to install the wire.
Body Reamet (not included)
10806 BLACK
10807 BLUE Step 1 Step 2
Make 7.5mm holes on the body, Body Mount
as shown. Cut the body shelll as shown.
Make 6mm hole
31143
For electric speed control cooling hole.
WASH THE INSIDE OF THE BODY SHELL
Wash the inside of the body shell with mild detergent,
and then rinse and dry thoroughly.
Step 1 Step 2