OFNA Racing Ultra LX 2e RTR - Manual (Page 4)

ATTENTION
•Before plugging in your batteries and turning on your radio
please read this page!
1. Check your brake and throttle dial on transmitter, and make sure it at MAX.
2. Turn on your transmitter.
3. Plug in your two 7.4v Lipo batteries.
4. Turn the switch to ON (Electronic Speed Control)
A. It will beep twice and LED will flash RED
B. Then the LED will go to solid Green on both LED
5. Now check your Throttle and Brake by slowly pulling the trigger.
(Make sure you don’t free wheel the buggy drive it around slowly)
6. Now everything should sync up you are ready to play.
Brake
Forward
For more instruction on all the function on your radio please refer to
pages 5-11 of this manual.
NOTE!
This model comes equipped with
a 14 tooth pinion gear. Do not
change the pinion gear to a higher
number tooth count. This can
cause motor and E.S.C. Damage
and will VOID THE WARRANTY!