Sangean DDR-62 (R1) - Manual (Page 70)

69
Inserting and removing memory devices
1. To insert an SD card into your radio push the card label side upward and gold contacts first
into the card slot on the front of your radio until it clicks. To remove the card, push the card in
so that it clicks once more. It will then be pushed out slightly allowing removal.
USB memory devices plug into the rectangular slot on the right hand side, behind the front panel.
Note: that the USB socket is upside down compared to those commonly found on PCs.
2. To select either SD card or USB mode press the Media button until the desired mode is shown
on the display.
Playing MP3 / WMA files - SD / USB
. Press the Play / Pause button to start playing from the SD card / USB memory device. The display
will show the first folder and file numbers - " 01" and " 001".
2. To pause playing press the Play / Pause button. To resume playing press the Play / Pause button
again.
3. To stop play, press the Stop button. The total number of files and folders on the media and the
stop symbol (■) will be displayed.
If you put the unit into standby mode without pressing the Stop button, then the next time the unit
is switched on it will return to the previously played file.