Sangean DAR-101 (R1) - Manual (Page 15)

4
GB
Preparing an SD card for use
In order to use an SD card in this unit, please format it first.
Note:
SD card format cannot be performed in DAR-101. Instead, the unit can only erase the files in it. If
SD card format is demanded, this can be performed on your computer.
. Make sure an SD card is installed and turn the power on. Press the Menu button to enter the
main menu.
. Rotate the Tuning control until ‘System Setup’ is highlighted and press the Enter button to enter
the setting.
3. Rotate the Tuning control until ‘SD Card’ is highlighted and press the Enter button to enter the
setting. It shows the status of the currently inserted SD card.
4. Press the Enter button to enter the SD card format setting. Rotate the Tuning control to highlight
YES to start formatting.
Important:
A standard 'GB' SD card
Must be formatted into FAT 6 and all the SDHC card MUST be for-
matted into FAT 3.