Sangean DAR-101 (R1) - Manual (Page 27)

6
GB
● To record a telephone call automatically: press the Menu button > rotate the Tuning control to
choose ‘RECORD SETUP’ and press the Enter button to select> choose ‘on’ to record incoming
phone calls automatically/ choose ‘off’ to record the calls manually following the basic recording
steps described in the Music section.
● To set beep tone to notify callers that recording is taking place: press the Menu button > rotate
the Tuning control to choose ‘REC BEEP’ and press the Enter button to select> Select ‘on’ and
press the Enter button to confirm the setting, beep tone is activated. Choose ‘off’ to deactivate
the beep tones while recording.
Note:
) It may be illegal to record a call without both parties knowledge and consent. Please check
with your local law enforcement.
) This unit can only record phone calls from land line.