Canon L250 User Manual
Page 115
Setting the Resolution and Contrast
j Setting the Scanning Resolution
Canon’s Ultra High Quality (UHQ™) imaging technology enables you to send faxes with a print quality
that is very close to that of the original document. The FAX-L250 also lets you adjust the resolution it
uses in sending faxes to best suit your particular document.
The FAX-L250 has three resolution settings:
¶ STANDARD resolution (203 × 98 dpi) is adequate for most text documents.
¶ FINE resolution (203 × 196 dpi) is suitable for documents with fine print (smaller than the print in
this sentence).
¶ PHOTO resolution (203 × 196 dpi, with halftones) is for documents that contain photographs.
With this setting, areas of the document that contain photos are automatically scanned with 64 levels
of grey, rather than just two (black and white). This gives a much better reproduction of the photos,
though transmission time is longer.
Set the resolution as follows:
1
Press RESOLUTION.
¶ The LCD display shows the current resolution
setting.
2
Press RESOLUTION until the resolution you
want is displayed.
3
Continue with the operation you wish to complete.
¶ If you do not proceed with any other operation,
the LCD display returns to standby mode after
about 5 seconds.
RESOLUTION
STANDARD
RESOLUTION
FINE
PHOTO
STANDARD
(FINE resolution with
halftone)
14:30
FaxOnly
Preparing to Send a Fax
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5-13