Sangean WFT-2D (V1) - Manual (Page 35)

GB

Set up UPnP access on a Windows PC-cont.
4. Touch Shared Media. The radio will scan for all available UPnP servers. It may take a few seconds
for the radio to complete its scan. The radio will display 'No UPnP service' if no UPnP servers
are found.
5. After scanning, select your UPnP server. If you allowed automatic connection previously, your
radio should now connect and you may skip to the next page.
If you did not permit automatic connections, your radio will then normally display 'Unauthorised'
at this stage.
6. Your PC may prompt you that there has been a connection to your UPnP server. Whether prompted
or not, in order that the radio may access the music files, you will need to click the 'Library' tab
in WMP 12 and select the 'Stream…' item to open the 'Media Streaming' window.
Select 'Automatically allow devices to play my media' then select 'Automatically allow all computer
and media devices'. Alternatively select 'More Streaming options' to enable sharing on a 'per
device' basis.
7. In the 'More streaming options' window, the radio will be listed as a blocked device. Click on the
button shown to select 'Allowed'.
Note:
If you are using Microsoft Windows' firewall software, this should be correctly configured by WMP
12. If you are using third party firewall software you may need to manually configure it to allow
your unit and WMP 12 to communicate.
8. On the radio, select the named server again. If WMP 12 is now able to communicate with your
radio you will be presented with some media selection options on the display.
Shared Media
USB Playback
My Playlist
15:05 26 Jun 2010
My Music
Select Music Source
JENNY: Jenny’s music
HOME_PC: Mums music
<Rescan>
15:05 26 Jun 2010
My Music
Shared Media