Sangean WFT-2D (V1) - Manual (Page 47)

GB

Using the DAB mode for this first time-DAB
If this is the first time that DAB mode is used a quick scan of the Band III DAB channels will be
carried out. The display will show ‘Scanning in progress.’ (If the radio has been used before the
last used station will be selected instead).
During the scanning process, as new stations are detected the station counter will be increase
and the stations will be added to the list which is stored in the radio. The bar graph indicates the
progress of the scan.
When scanning is completed the radio will list the stations found (in numeric-alpha order 0….9….
A….Z….), unless it has previously been tuned to a DAB station.
Touch the
UP or Down arrows or press the area between the arrow and the bar to scroll further
to view the list of stations.
To select desired station touch the station name that you wish to tune to. The radio will return to
the selected station. Use the Volume control to set the sound level as available.
A question-mark in front of the station merely indicates that the station has not recently been
detected by the radio. It may still be available.
If the station list is still empty after the scan the display will show ‘No signal please adjust your
radio’. If no stations are found it may be necessary to relocate your radio to a position giving
better reception.
Station List
The Arrow - Rock
BBC Radio 6Music
BBC Radio 1
BBC Radio 1Xtra
15:05 26 Jun 2010
DAB
Scanning in progress...
Stations found: 35
Cancel
15:05 26 Jun 2010
DAB