Warpia SWP120A Getting Started User Guide - Manual (Page 3)

Wiring
Connect the HD Adapter using an HDMI cable to the TV and S/PDIF cable to your home theater (if available).
Connect the power cable. Tray icon turns green and the display icon appears .
Set the home theater input according to the cables used (HDMI, S/PDIF or 3.5 mm)
Other combinations for connecting the cables are possible, for example HDMI in to the home theater and
HDMI out from the home theater to the TV.
Please refer to the Troubleshooting guide under the Wireless USB manager taskbar icon
for more options.
Make Sure your TV is ‘on’ and is set to display the correct video input
For Surround sound (if available)