BendixKing KHF 990 - Manual (Page 78)

PROGRAM ADDRESS
The system program page provides access to the ALE address page.
When ‘Address’ is selected on the system program page, pressing
the ENT key provides access to the ALE address entry page. The
sub-page returns to this page when the CLR key is pushed to exit the
page. There is only one sub page.
ALE ADDRESS ENTRY PAGE
ADDR ALE address sub page label
TTTTTTT * Address type SELF, SINGLE, StarNET, GROUP
line 2 * address or parameter
* Cursorable fields
The self address is listed first because an associated self is required
for the other address types. There are several parameters that must
be entered for each address, such as channel group and the associ-
ated self. The number of parameters depends on the address type.
After the operator makes an entry and pushes ENT or moves the cur-
sor, the next parameter to be changed is displayed. The address
type field requires special handling to prevent accidental changes of
address types. Changes to the address type are accepted only if the
ENT key is pushed. If the address type is changed and the cursor is
moved off of the address type field, the address type will revert back
to the original type.
Operation
3-41 KHF 950/990 Pilots Guide
Rev. 0
Dec/96
SYS Program
{Address
Figure 3-52 SYS Program Address
ADDR TTTTTTT ###
1234567890123456
Figure 3-53 ALE Address Entry Page