BendixKing KLN 35A - Quick Reference Guide System KLN 35A User Manual
Page 4
To change the navigation info displayed in the lower left corner:
1. Press the
B
button.
2. Use the right outer knob to move the cursor to the cyclic field in the lower
left corner.
3. Press
E
to change between the choices, which are:
• Groundspeed (figure 5),
• Estimated Time En route (ETE) to the active waypoint (figure 6),
• Crosstrack correction (figure 7), or
• Magnetic Desired Track (DTK) (figure 8).
To scan through the active flight plan waypoints:
1. Pull out and turn the right inner knob (figure 9).
2. With desired waypoint displayed in scanning window, press
D
to go
direct-to the selected waypoint.
-4-
17.6nm
SGJ
{
>Leg
>117kt
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
SUA:
on
VOR:off
APT:on
123°
KJAX
"
KORL
OMN
%
%
% %ORL
GJ
SGJ
Figure 7
Figure 8
Figure 9
17.6nm
SGJ
{
>Leg
> 1.2∆
APT VOR NDB
17.6nm
SGJ
{
>Leg
> 123
APT VOR NDB
DTK
Figure 5
Figure 6
17.6nm
SGJ
{
>Leg
>117kt
APT VOR NDB
17.6nm
SGJ
{
>Leg
> 1:23
APT VOR NDB
KLN 35A 5/6/03 11:06 AM Page 6