BendixKing KLX 100 - Users Guide - Manual (Page 2)

To initialize the time
and date:
1. Select the Main Menu,
then the GPS Initialize
page.
2. If the time zone is incor-
rect, use the , softkey to
move the cursor to the
time zone field and press
the d softkey until the
correct time zone is shown.
3. Move the cursor to the
TIME field, enter the
numbers for the correct
time (in 12-hour or 24-hour
time) and press the e
softkey.
4. Move the cursor to the
DATE field and enter the
numbers for the correct
day of the month.
5. Use the - and + soft-
keys until the correct
month is shown. Press e.
6. If necessary, enter the cor-
rect numbers for the year
and press e.
To view the nearest
airport(s):
1. Press the N key, then
select APT and press e.
The five nearest airports
will be displayed. Use the
, and . softkeys to
select the other nearest
airports.
2. Press the i softkey to see
the Waypoint page for the
selected nearest airport, or
press the D key if you
wish to go Direct To the
selected nearest airport.
To use help:
1. If you are on a page with
which you are not familiar,
press the H key to see 1-3
pages of help about that
particular page .
2. After you read each page of
help, press the p softkey
to look at the next page.
3. If you wish to see addition-
al help topics, press the j
softkey for the help index.
To cancel a Direct To:
1. Press the D key to display
the Direct To (DIR) page.
2. Press the c softkey to
clear the Direct To way-
point field.
3. Press the e softkey to
confirm you want to cancel
Direct To operation.
If there are waypoints in the
Active Flight Plan (FPL 0),
the KLX 100 will navigate
along the nearest leg. If there
are no waypoints in FPL 0,
KLX 100 navigation will flag.
To enter a frequency
on the Title Bar:
1. If necessary, press the C
key to turn off the cursor.
2. Press the 1 key for a
COMM freq. or press the
8 key for a weather freq.
(Americas DB). Nearest
WX channel is filled in.
3. Use the phonepad number
keys to complete the entry.
To go Direct To a
waypoint:
1. Press the D key. The
Direct To (DIR) page will
be displayed with a way-
point page.
2. Enter the desired waypoint
identifier using the phone-
pad keys along with the
softkeys. Verify that the
desired waypoint is dis-
played.
3. Press the e softkey to
confirm. This initiates the
Direct To—your D-bar will
be centered, and you’re on
your way!
Alternatively, display the
desired waypoint on the NAV
4 page, or move the cursor
over a desired waypoint iden-
tifier field on any page, and
press the D key followed by
the e softkey to initiate the
Direct To.
AlliedSignal
Commercial Avionics Systems
400 North Rogers Road
Olathe, Kansas 66062-1294
TELEX 669916 KINGRAD
FAX 913-791-1302
TELEPHONE (913) 782-0400
© 1996 AlliedSignal Inc.
9/96 006-18009-0001 4K
Printed in USA
A
To initialize the
present position:
1. Select the Main Menu,
then GPS Initialize page.
Make sure the GPS mode
is NORMAL. Use the d
softkey to change the
MODE if necessary.
2. Use the , softkey to move
the cursor to the WPT
field.
3. Use the phonepad keys
and softkeys to enter the
identifier for a nearby way-
point.
4. Press the e softkey.
KLX 100 QuickRef 5/16/03 10:36 AM Page 6