Loss of valid egpws data, No data received – BendixKing KMD 540 - Addendum System KMD 850 User Manual
Page 21
KMD 550/850 Terrain Addendum
13
Rev 3 Jun/2004
LOSS OF VALID EGPWS DATA
If another page of the KMD 550/850 is being viewed and the EGPWS
data becomes invalid the following message will be displayed.
This may indicate that the EGPWS no longer has a valid GPS position. It
could also indicate a problem with the EGPWS unit or the installation
wiring. Note that the Terrain Icon is displayed with a red circle and slash
through it to indicate that the EGPWS is no longer functioning properly.
NO DATA RECEIVED
If the KMD 550/850 is not receiving any data from the EGPWS sensor
then the following screen will be displayed. This could indicate that
power is not being provided to the EGPWS (e.g. a pulled breaker), a bad
wiring connection between the display and the EGPWS sensor, or a
failed EGPWS unit.
KMD 550-850 EGPWS PG R3 7/1/04 2:49 PM Page 13