Failure conditions, Radio altimeter, Tas system test ok – BendixKing KTA 910 System KTA 970 User Manual

Page 39: Tas system test fail

Advertising
background image

KTA 870/KMH 880 Pilot’s Guide

Rev 2

006-18265-0000

31

TAS Appendix

At the conclusion of a successful Self Test, a synthesized voice
announces:

“TAS SYSTEM TEST OK”

FAILURE CONDITIONS:

Should a failure be detected during self test, the audio message says:

“TAS SYSTEM TEST FAIL”

A “TAS” flag will be annunciated on the traffic display. A self test failure
may indicate that the auxiliary equipment required for TAS is not opera-
tional. Check the associated equipment.

Should a display failure be detected at any time, the Display Fail flag will
appear on the KMD 550/850. A “Display Fail” flag is not caused by the
TAS processor.

RADIO ALTIMETER

If RALT is installed and is inoperative, TAS will be Inoperative.

Advertising
This manual is related to the following products: