BendixKing KT 74 - Manual (Page 12)

KT 74 Pilot's Guide
Operation D201308000036
Page 1-6 Rev 0 Dec 2013
© Honeywell International Inc. Do not copy without express permission of Honeywell
Squawk Code Entry
Press any of the numeric buttons (0 through 7) to change the
squawk code. A new squawk code is set when the fourth digit is
entered. If the code entry is not completed within 7 seconds, the
changes are ignored and the previous code restored.
Some standard squawk codes are listed below:
• 1200 VFR code in the USA
• 7000 VFR code commonly used in Europe
• 7500 Hijack code
• 7600 Loss of communications
• 7700 Emergency code
1.6 FUNCTIONS
Figure 1-5: Functions
The different KT 74 functions are accessed using the FUNC button.
The functions displayed vary depending on whether the aircraft is
airborne or is on the ground (squat switch or other method of
air/ground determination installed) and has the GPS input enabled or
not as shown in the following tables.