Cabletron Systems Expansion module DELHE-UA - Manual (Page 31)

Installing the DELHE-UA
DELHE-UA User’s Guide 2-7
Figure 2-4 Installing the DELHE-UA
7. Align the connector on the DELHE-UA with the connector on the
module.
8. Press down firmly on the connector area of the DELHE-UA until the
connector slides all the way onto the pins. Ensure that the standoffs on
the interface module align with the standoff screw holes on the
DELHE-UA.
!
Ensure that the DELHE-UA connector aligns with the module
connector pins to prevent bending the pins. This can damage
both the DELHE-UA and the module.
Faceplate Mounting Screws
mounting
Standoffs
HSIM
Connector
DELHE-UA
Standoff Screws
Connector
(top view)
Cutaway view of connector
Connector
DELHE-UA
FEPIM 1
FEPIM 2
SP
Host Platform