CANOGA PERKINS 9160 10 Gigabit Ethernet Network Interface Device - Manual (Page 35)

9160 10 Gigabit Ethernet Network Interface Device 3-21/(3-22 Blank)
Check the Forwarding Database
To view the listings of VLAN ID, MAC address, port name, and status in the Forwarding database
(Fdb log), follow these steps:
1. From the Main menu, type 4 , "Reports," and press <Enter>.
2. From the Reports menu, type 5, "Fdb Log," and press <Enter>. View the listings of VLAN ID,
MAC address, port name, and status.
3. To return to the Main Menu, press <Esc>.
Check the Static ARP Table
The Static ARP table lets you set or change specific IP and MAC addresses for up to 10 ports. The
Dynamic ARP table lists currently-assigned IP and MAC addresses for various 9160 ports.
To view, set, or remove a static ARP address, follow these steps:
1. From the IP Settings screen, type 7 , "Static ARP Table," and press <Enter>.
2. At the prompt, type a number to edit a port, and then follow the prompts.
3. To return to the IP Settings screen, press <Esc>.