CANOGA PERKINS 8829 UTP-to-Fiber Optic Media Converter User Manual
Page 13
Advertising
8829 Media Converter
Canoga Perkins
13
The 8829 Media Converter connects to fiber optic
cable via ST* connectors on the rear panel (see
Figure 2-3).
Figure 2-3. Fiber Optic Connections
When working with fiber optic cables and con-
nectors, care should be taken to prevent contami-
nating connector plugs and sleeves. Dirt and dust
can significantly affect connector insertion loss and
consequently degrade performance.
NOTE: Connectors should be covered with
protective plastic caps when not in use.
* ST is a Registered Trademark of American Telephone and
Telegraph.
Advertising