7 user accounts screen, User accounts screen -15, Figure 26. user accounts screen -15 – CANOGA PERKINS L357 Gigabit Ethernet Service Unit User Manual

Page 35

Advertising
background image

EdgeAccess Universal Chassis System

Menu Item

Description

9. Password Reuse Count

Set whether the password must be changed or can be
used again immediately; values are 0 (new password can
be the same) or 1 (new password must be different)

10. Lockout After Failed Attempts

Set how many times, from 1 to 10, that a user can try to
log in before a lockout; 0 = disabled

11. Lockout Type
Lockout time

Set the type of lockout: Hard requires another user with
admin access to unlock the account on the User
Accounts screen; Timed requires that the user wait for
Lockout time before trying again; Lockout time is from
0 (none) to 30 minutes

12. Display Lockout Message
13. Lockout Message

Enable or disable and set the message, up to 30
characters, that appears at lockout

14. Lockout Craft Port

Disable access to the serial port to prevent any
unauthorized access; to re-enable the craft port, run a
Telnet session

15. Inactivity Logout time (mins)

Set the time, between 1 and 30 minutes, before
automatic log-out with no activity; 0 = disabled

4.5.7 User Accounts Screen

The User Accounts screen provides options to set values for parameters for specific users. To access
the User Accounts screen, see Figure 26 and follow these steps:

1. From the System Configuration menu type

7

, "Account Configuration," and press <Enter>.

USER ACCOUNTS
Account Access Access Locked
Username State From Level Description Out

admin Enabled UI/SNMPv3 Supervisor Upgrade Account No

Figure 26. User Accounts Screen

2. To add a user, type 1, or to edit an existing user, type 3, and press <Enter>, then type the

Username and follow the prompts on the Edit User Account screen to enter values or press
<Space> to cycle through options for these parameters:

• Account State: enabled or disabled
• Access From: UI, SNMPv3, or UI/SNMPv3

• UI indicates access through Telnet, Console, SSH, FTP, or SFTP, and requires additional

parameter setup

• SNMPv3 enhances security and requires additional parameter setup

• Access level: Supervisor, Operator, or Observer
• Description: optional; up to 17 characters

L357 Gigabit Ethernet Service Unit

4-15

Advertising