2 fiber optic options, 3 features – CANOGA PERKINS 2340 Universal Fiber Optic Modem User Manual
Page 11
EdgeAccess® Universal Chassis System
Model 2340 Model User Manual
1-3
1.2
Fiber Optic Options
The 2340 includes one fiber-optic transmitter and receiver. Use the 2340 with multimode or single
mode fiber optic cable and SC or ST connectors, depending on the transmitter option. The transmitter
options include:
• Single Mode, at 1310 nm and 1550 nm
• Multimode, at 1310 nm
• CWDM
For descriptions of the options by model number, see Chapter 6.
1.3 Features
The 2340 supports these features:
• Status LEDs
• Console port for accessing management functions through SLIP, PPP, SNMP
• Redundancy: Two modems at each end of the link provide full redundancy in these modes of
operation:
• Auto Switchover Monitors the link; if the active modem fails, switches automatically to the
inactive modem
• Manual Primary Makes the primary modem active
• Manual Secondary Makes the secondary modem active
• Off Disables redundancy
• ELIM connector adapters for P53
• Local and Remote loopback for test
• TRM/MDM and Reset switches