11 enter snmp trap port, Enter snmp trap port, Figure 2-12: enter snmp port trap – CANOGA PERKINS CanogaView Smart Element Manager User Manual
Page 23
Advertising
![background image](/manuals/651363/23/background.png)
CanogaView
®
Smart Element Manager
2.2.11 Enter SNMP Trap Port
The "Enter SNMP Trap Port" screen allows the selection of a port number on which the
CanogaView Trap Service should listen for SNMP traps. The default port for this installation
is 163 and as explained on the installation screen, unless other network management
software uses this port, the default port should be selected.
Figure 2-12: Enter SNMP Port Trap
Standalone
Version
15
Advertising