CANOGA PERKINS CanogaView Smart Element Manager - Manual (Page 75)

CanogaView
®
Smart Element Manager
For each trap received, you should see messages from "TRAPSERVICE" and
"EVENTENGINE".
5. Make sure that the CanogaView Smart Element Manager Trap Service is listening for
SNMP traps on the correct port.
The Trap Service listens for SNMP traps on the port number specified during the
installation; this should be port 163 for computers that have HP's Network Node
Manager or other network management packages installed, and port 162 otherwise. If
configured incorrectly, Trap Service will either fail to start or will not process any traps.
You can verify the configured port number by opening the service.conf file in your
CanogaView Smart Element Manager installation directory with a text editor. The
number following the string "-trapport" is the port number. If this number is incorrect,
change it, save the change, and stop/restart the CanogaView Smart Element Manager
services as documented above.
Standalone Version 67