CANOGA PERKINS 9161 Network Interface Device - Manual (Page 23)

3. To return to the IP Settings screen, press <Esc>.
Use the Dynamic ARP Table to view the currently assigned IP and MAC addresses for various ports.
See Figure 10.
DYNAMIC ARP TABLE
IP Address MAC ADDRESS Port IP Address MAC ADDRESS Port
172.16.2.82 00-98-2C-BE-27-01 User
172.16.153.6 00-50-54-C3-33-41 Ext
Figure 10. Dynamic ARP Table Screen
To view the current addresses, follow these steps:
1. From the IP Settings screen, type 7 , "Dynamic ARP Table," and press <Enter>.
2. To return to the IP Settings screen, press <Esc>.
4.5.3 Host Access Table Screen
The SNMP agent allows access to up to 24 Host IP addresses. Set up and edit the Host information
for the 9161 at the Host Access Table screen. See Figure 11. To access the Host Access Table,
follow these steps:
1. From the System menu type 3 , "Host Table/ SNMP Settings," and press <Enter>.
2. At the Host Access Table screen, type 1 to edit a host at the Edit Host Access Entry screen, 2 to
add a host at the Add Host Access Entry screen, or 3 to remove a host, then follow the prompts.
3. To return to the System Menu, press <Esc>.
HOST ACCESS TABLE
Managing Host Protocol SNMP SNMP V1/V2c Read V1/V2c Write V1/V2c
IP Address/Mask Access Access Protocol Community Community Access Lvl
172.016.002.232/32 All Write V1/V2c/V3 public private Supervisor
172.002.002.232/32 All None N/A N/A N/A N/A
172.016.142.001/32 All Write V1/V2c/V3 public private Supervisor
1. View/Change Host
2. Create Host
3. Delete Host
4. Main Menu
Figure 11. Host Access Table Screen
9161 Network Interface Device 4-7