CANOGA PERKINS 9161 Network Interface Device - Manual (Page 25)

SECURITY CONFIGURATION
PASSWORD CONFIGURATION
1. Minimum Length : 0
2. Minimum Alpha Characters : 0
3. Minimum Numeric Characters : 0
4. Minimum Punctuation Characters : 0
5. Maximum Consecutive Character Types : 0
6. Maximum Same Character : 0
7. Allow username in password : Disabled
8. Password Expiration Time : 0
9. Password Reuse Count : 0
LOCKOUT/LOGOUT CONFIGURATION
10. Lockout After Failed Attempts : 0
11. Lockout Type : Hard
12. Lockout Time : 0
13. Display Lockout Message : Disabled
14. Lockout Message : Account has been locked out
15. Lockout Console Port : Disabled
16. Inactivity Logout time : 0
Figure 13. Security Configuration Screen
Table 5. Security Configuration Option Definitions
Menu Item Description
1. Minimum Length
2. Minimum Alpha Characters
3. Minimum Numeric Characters
4. Minimum Punctuation Characters
5. Maximum Consecutive Character
Types
6. Maximum Same Character Define characteristics of passwords; the range for all
fields is from 0 through 15
7. Allow username in password Enable or disable the username appearing as or within
the password
8. Password Expiration Time Set how often in days, 1 through 365, that the passwords
must be reset; 0 = disabled
9. Password Reuse Count Set whether the password must be changed or can be
used again immediately; values are 0 (new password can
be the same) or 1 (new password must be different)
10. Lockout After Failed Attempts Set how many times, from 1 to 10, that a user can try to
log in before a lockout; 0 = disabled
11. Lockout Type
12. Lockout time Set the type of lockout: Hard requires another user with
admin access to unlock the account on the User
Accounts screen; Timed requires that the user wait for
Lockout time before trying again, Lockout time is from
0 (none) to 30 minutes
13. Display Lockout Message
14. Lockout Message Enable or disable and set the message, up to 30
characters, that appears at lockout
9161 Network Interface Device 4-9