CANOGA PERKINS 9160 10 Gigabit Ethernet Network Interface Device - Manual (Page 39)

Chapter 5
Specifications
See also the specifications for the chassis or standalone enclosure.
9160 Specifications
Standards: IEEE 802.3
Dimensions: 2.625" H x 17.25" W x 14" D (66.7 x 438.1 x 355.6 mm)
Weight: 15 lb. (6.8 Kg)
Operating Temperature: 0° to 50° C
Operating Humidity: Up to 90% (non-condensing)
AC Power: 100 to 240 VAC, 50 to 60 Hz autoranging, 60 W Max., 0.7 A
at 110V
DC Power: 36 to 72 VDC, 75 W Max., 1.6 A at 48 VDC
Regulatory Compliance
• ETL, cETL & LVD (UL 60950 CAN/CSA C22.2 No. 60950, EN/IEC 60950)
• EMC Directive (EN55022 Class A, EN 55024, EN 61000-3-2/-3-3)
• CE Mark
• FCC Part 15B (U.S.)/ICES-003 (CAN)
• VCCI Class A (Japan)
• C-Tick (AS/NZS 3548 - Australia)
• CDRH CFR21/IEC 60825-1 (Laser Safety)
• NEBS Level 3 Certified & Tested (TBD)
EIA-232 Pinout
Pin Number Signal Name Source I/O
1 RI DCE Output
2 DCD DCE Output
3 DTR DCE Input
4 SIG GND
5 RXD DCE Output
6 TXD DCE Input
7 CTS DCE Output
8 RTS DCE Input
9160 10 Gigabit Ethernet Network Interface Device 5-1