Daiwa TANACOM BULL 500 - Manual (Page 28)

26
Attention
1. While Live Lining mode is enabled, use the power lever to feed the line.
Line feeding function
The line feeding function lets our line with the motor assisting the spool.
- The line feeding mechanism begins to work at a depth of 2.5 m
below the pre-set auto stop depth.
- When Live Lining mode is ON, line feeding will not automatically
start.
2.
Press the MODE BUTTON three times to show 0.0 (depth
counter) to complete.
The will blinks.
While the reel is feeding line with this function, its speed cannot
be changed.
(adjustment of
line furnishing)
(the figure corresponds
to the case of setting to 5)
Functional setting operation
(8. Line feeding function)
OFF
- Speed of the line going out is adjusted with 32 speed levels
ranging between 0 and Hi. It is adjusted in the line feeding
mode.
1
2
1. Press the MODE BUTTON to show the line feeding speed
adjustment display. Default setting is zero (OFF).
Set the speed level with the power lever.